How thick is Decorative Concrete?
We generally apply our systems on old concrete between 3/32" to 1/8". CTI's systems are thin layered cements that, when properly applied after the original surface is prepared, adhere to the concrete through the use of modified acrylics.

What color does it come in?

We have a variety of standard colors to choose from.

How long does it take to do a job?

An average job will take 1-2 days. Larger, more complex jobs my take longer. Clean foot traffic is usually allowed within 24 hours.

Will pool water, chlorine, muriatic acid or bleach stain the Decorative Concrete?

No, the sealer we apply to our system is not affected by most chemicals.

How do you treat cracks?

Cracks are ground out with a crack chaser to produce a "V". A two part epoxy is then introduced into the crack and will rebond the crack.

Can Decorative Concrete be applied to walls?

Yes, however, multiple spray coats are needed to reduce rebound or waste.

General Data:

  • Compressive Strength (ASTM C-109-73): PSI 28 days, 5715 PSI

  • Flexuaral Strength (ASTM C-348-72): PSI 28 days, 1585 PSI

  • Tensile Strength (ASTM C-190-72): PSI 28 days, 615 PSI

  • Sheer Bond Strength 20 days 650 PSI

  • Abrasion Resistance (%weight loss): 28 days 18 in-lbs.

  • Chloride Ion Resistance: Ponding 3% Sodium Chl./60 days 100% at 1" depth

  • Freeze/Thaw Resistance (ASTM C-291) Passes 60 cycles

  • UV Resistance: No discoloration when exposed to ultraviolet

  • H2S04 (Sulfuric Acid) 10% Solution: 5 minute immersion - unaffected

  • NaOH (Sodium Hydroxide): 10% Solution: 5 minute immersion - unaffected

  • Gasoline: 5 minute immersion - abrades slightly

  • Citric Acid: 10% solution: 5 minute immersion - unaffected

     

    Have Concrete Questions? Get them answered here!Have Questions About Concrete?

    Get all your questions answered here! Don't see your question? Still have a question?
    Merit Concrete
    Phone 773-283-5877
    Email
    4143 N Tripp Avenue, Chicago, IL 60641

    All Rights Reserved 2001